Y型噴嘴間距對隧道式速凍機內部流場的影響分析

打開文本圖片集
中圖分類號:TS203 文獻標志碼:A 文章編號:1003-5168(2025)14-0050-06
DOI:10.19968/j.cnki.hnkj.1003-5168.2025.14.010
Impact Analysis of Y-Type Nozzle Spacing on the Internal Flow Field in Tunnel Freezers
ZHANG Dingchuan'ZOU Tonghua'LI Chenkai'SHEN Zhonggang2 (1.Tianjin Universityof Commerce,Tianjin 30o134, China; 2.Shandong Honor Refrigeration Technological Limited Company,Binzhou 25660o,China)
Abstract: [Purposes] In order to improve the freezing efficiency of the freezer and the quality of the frozen products,as well as to determine the optimal nozzle arrangement,this study analyzes the influence of diferent Y-type nozze spacing on the internal flow field of the tunnel freezer.[Methods] By varying the spacing of the Y-type nozzles,the optimal nozzle arrangement was determined.Taking the Y-type nozzles with different spacings as the research subject,a physical model matching the actual setup was established,and simulations were conducted using the COMSOL software.[Findings] In this paper,Ytype nozzles with diferent spacing are set up respectively.The average outlet wind speed is about 17.3 m/s, and the fluctuation is within 0.2m/s . The simulation results showed consistent velocity variation trends along the jet direction for allfive models. However,appropriately increasing the nozzle spacing could reduce the ratio of crossflow width to the total length of three nozzles.[Conclusions] When the nozzle spacing increases from 93mm to 133mm ,the ratio of the crossflow width to the total length of the three nozzles decreases from O.55 to O.46, indicating improved heat transfer eficiency.This provides a reference for further optimizing the nozzle arrangement of the tunnel-type quick freezer. Keywords: tunnel-type quick freezer; air flow organization; nozzle spacing
0 引言
隨著科技與經濟的不斷發展,人們對食品品質的要求日益提升。(剩余6784字)